ArabicEnglishFrenchGermanRussianSpanishTurkish

SMAW stands for shielded metal arc welding, also commonly called ‘stick’ welding. In SMAW, the electrode is a metal rod or stick held in the torch with a small clamp. An alternate or direct current is then used to form an electric arc between the electrode and the metals to be joined.

JACKSUN WELD CUT

SPECIAL CUTTING ELECTRODES FOR CUTTING AND PIERCING OF ALL FERROUS AND NON-FERROUS METALS

  • CHARACTERISTICS
    Jacksun Weldcut is a special type of coating gives penetrating  and stable arc during all position cutting and piercing process. It cuts all metals and alloy without gas, compressed air or oxygen or special torches.

  • APPLICATIONS
    Cutting and piercing of steel, cast iron, aluminium, copper, bronze, nickel alloys, dismantling structures at site, cutting of stainless or plates cladded with stainless steel, burning  rivets, cutting out unwanted metal in foundry casting.

  • WELDING TECHNIQUE
    Mark the area to be cut or pierced, hold the electrode at an angle of 450 to the job and use a sawing motion to cut. The high arc-force produced by the electrode and the applied pressure ensure rapid cutting. For piercing, position the
    electrode perpendicular to the part, strike the arc and apply push in and pull out motion till the part is pierced.
CHEMICAL COMPOSITION OF ALL WELD METAL

CARBON – 0.15% MAX
MANGANESE
– 1.60% MAX
SILICON
– 0.75% MAX
PHOSPHORUS
– 0.035 MAX
SULFUR
– 0.035 MAX
CHROMIUM
– 0.2%
NICKEL – 0.3%
MOLYBDENUM – 0.3%
VANADIUM
– 0.08%

MECHANICAL PROPERTIES OF ALL WELD METAL

Not to be used for joining

WELDING CURRENT

DC(+) / AC 70V

  • 3.15 mm – 150 – 250 Amps
  • 4.00 mm – 200 – 300 Amps
  • 5.00 mm – 300 – 400 Amps

Packaging

Size (mm)1 BOX1 CARTON
3.15 x 4505 Kgs20 Kgs (4 PKTS)
4 x 4505 Kgs20 Kgs (4 PKTS)
5 x 4505 Kgs20 Kgs (4 PKTS)

Select Language:
ArabicEnglishFrenchGermanRussianSpanishTurkish

Browse origin: India | Africa | Global

Our locations